Experienced Basement & Crawl Space Waterproofing Contractor in Richardson, TX

The customer contacted Olympic Restoration Systems after having previous work done.  He now had an issue with a utility closet after removing his water heater and furnace.  There had been some water damage and potential mold.  Olympic Restoration Systems was contacted for an assessment of their home. We visited the property and proposed a quote to the customer. They proceeded with a crawl space hatch enlargement and debris removal from their crawl space.  We removed all debris from their crawl space.  

This homeowner contacted Olympic Restoration Systems due to some water damage to a below-grade room in their home.  Upon inspecting the leaks, our team properly prepared the floors and the surrounding wall area (approximately 6-9 inches high) and then sealed them using a three step process which includes PermaFlex and LRB applications.

Customer contacted Olympic Restoration Systems due to high moisture content in their crawl space, either from rain or ground water, as well as high humidity within the home.  A wet crawl space can lead to mold growth, warping hardwood floors inside the home, musty odors, and increased allergies and asthma while in the home. We sent one of our crawl space experts, Terry, to the home for a free inspection and estimate. Terry found many issues that caused moisture in the crawl space, including groundwater seepage and open crawl space vents. Terry designed a solution to keep the crawl space dry, which included installing drainage matting, sump pump, vapor barrier, and dehumidifier. This allows for the vents to be closed, and turns the crawl space into a conditioned area. The homeowner was pleased with the solution and pricing and proceeded with a full crawl space encapsulation system from Olympic Restoration Systems.

This homeowner called looking for a solution to his cold hardwood floors, and because he was concerned that his HVAC system was running more often than it should. He suspected that the crawl space was the issue. We sent one of our System Designs Specialists, Ross, to the home for a free crawl space inspection and estimate. Ross found evidence of moisture issues and a lack of insulation in the crawl space. He proposed a crawl space encapsulation system that involved closing off all outside air to the crawl space, and installing a drainage matting, vapor barrier, sump pump, and dehumidifier. This would turn the crawl space into a conditioned area, which would insulate the area and prevent moisture issues. The homeowner was pleased with the proposal and proceeded with the work from Olympic Restoration Systems.

After mold was found in this crawl space by a licensed mold inspector, the homeowner called Olympic Restoration Systems for a free crawl space encapsulation and mold remediation estimate. She wanted to find a way to get the mold out of her crawl space, and prevent it from coming back. One of our System Designs Specialists and licensed mold remediators, Darrin, went to the property and inspected the crawl space. He presented a solution to the homeowner, and she proceeded with the crawl space encapsulation and mold remediation.

This homeowner called after he recently purchased a 1950s home. The home had a vented crawl space that he was concerned was the source of problems with energy, comfort, and humidity. He wanted to find a way to improve the energy efficiency of his home, along with keeping the pipes that run through the crawl space warm in the winter. He also wanted a crawl space solution that would reduce the humidity in his home, and keep his floors warmer in the winter. 

We sent one of our crawl space specialists, Ross, to the home for a free crawl space estimate. After assessing the property, Ross proposed a free crawl space repair quote to the homeowner. The homeowner accepted and proceeded with a crawl space remediation from Olympic Restoration Systems. 

We sent our professionally trained production team to the property to begin the crawl space encapsulation process. They removed debris, regraded the soil, sealed the crawl space from outside air, placed a drainage matting, installed a CleanSpace vapor barrier and SmartSump sump pump, and finally placed a SaniDry Sedona dehumidifier in the crawl space.

This customer called and stated that she was concerned that their current attic insulation was old and inadequate. She wanted an estimate to have her current attic insulation removed and replaced with TruSoft Blown In Cellulose insulation. We sent one of our System Designs Specialists, Darrin, to the house for a free attic insulation estimate. Darrin presented his findings and solutions to the homeowner, who then proceeded with attic insulation from Olympic Restoration Systems.

This customer called stating there was water in her crawl space and wanted an estimate completed for crawl space remediation. We sent one of our System Design Specialists, Ross, to assess the property. During the inspection, Ross found water, mud, and other signs of moisture issues in the crawl space. Ross presented the homeowner with a solution to remediating her crawl space. The customer accepted and proceeded with a crawl space remediaiton from Olympic Restoration Systems, which included placing a SmartSump, drainage matting, CleanSpace vapor barrier, and a SaniDry Sedona dehumidifier in the crawl space.

Water leaks in this basement prevented the homeowners from utilizing the space, so we were called to seal the leaks and remove the water. We decided to install a two-stage waterproofing system including a DryTrac waterproofing baseboard and relief drain complete with a SmartSump pumping system to seal the leaking seam and pump out the water.

Moisture leaks, open soil, and poor drainage led to standing water and significant mold growth throughout this crawl space. The mold and humidity can be harmful to the air quality within the home, so we wanted to ensure the crawl space was left completely overhauled.

We installed a CleanSpace crawl space encapsulation system as well as a dehumidifier to dry up the air. We also applied Mold-X2 Cleaner and Botanical to the areas affected with mold.

After noticing a persistent musty smell, these homeowners called wanting to check their crawl space for humidity. Our team discovered high humidity, condensation along the subfloor, and some areas of where water collects after a rain.

First our team added a pump to remove the standing water in the crawl space and then added the CleanSpace encapsulation system and drainage matting to block the humidity from the ground. Next, we regraded the dirt in the crawl space to send water from the dehumidifier to the pump.

When this homeowner discovered he couldn't get a warranty on his new wood floors unless he had a vapor barrier installed, he contacted our company for an estimate. When we discovered high humidity levels and standing water in his crawl space, he opted for encapsulation to protect the future of his home and flooring. 

Using a CleanSpace vapor barrier, SaniDry dehumidifier, and sump pump, we separated the home from the earthen floor, leaving this homeowner satisfied that his new floors were safe. 

After moving from a home with an encapsulated crawl space, this couple became concerned about the dampness below their new pier and beam home. Knowing what kinds of problems humidity can cause, they called us to encapsulate. 

Using a system that included drainage matting, a CleanSpace vapor barrier, sump pump, and dehumidifier, we were able to put these homeowners concerns at rest. 

After a period of heavy rainfall, these homeowners noticed their brand new wood floors cupping and buckling. They called the flooring company who suggested they have their crawl space humidity checked. Our specialist found a damp crawl space with high humidity and condensation on the sub-floor. They decided to encapsulate.

Our team installed a CleanSpace drainage mat, CleanSpace vapor barrier, sump pump, and dehumidifier. A panel was placed inside the house so the owners could monitor the humidity at all times, ensuring it wouldn't further damage their floors. 

After researching, this homeowner thought his cupping floors might be caused by his crawl space. Our specialist evaluated the situation, discovering high humidity and standing water in the crawl space. We decided encapsulation was the best solution. Using a sump pump, trench drain, and CleanSpace durable liner, we were able to lower the humidity levels, saving this customer from further damage to his floors. 

This homeowner noticed mold behind their kitchen cabinets during a remodel. Our team was contacted and we immediately went to work.

We first set up a containment area with negative air fans. We then treated the affected materials that remained with MoldX stain remover, and then treated it a second time with MoldX Botantical disinfectant. All exposed cavities were HEPA vacuumed, leaving this home mold free and the remodeling work back in service.