Proudly serving Greater Dallas Fort Worth- including Dallas, Fort Worth, Arlington and surrounding areas.
Customer experienced damaged floors and walls from Mold Growth. We were contacted to perform the Mold Remediation. Photos of Bedroom before and after the services were performed.
Our customer was having an issue with mold growth due to moisture. The moisture had come from condensation that their freezers that had created. Over time the condensation seeped into the walls and mold began to multiply.
We came in and quickly removed the effected drywall and wood. We dried the area and prepared it for new drywall to be installed. Now the Customer has a healthy, non toxic environment!
When a family in Mesquite, Texas, experienced a plumbing leak in their bathroom, they did not expect the extent of mold growth the leak would cause. A mold inspector was brought in to assess the situation, supplying the family with a mold remediation protocol. They then contacted the team at Olympic Restoration Systems to remove the mold. Due to the wide spread coverage of mold, the light fixtures, mirrors, toilet, sink, counters, cabinets, baseboards, tile, and dry wall would need to be removed as a part of the remediation process.
Our team arrived and began to work quickly. Setting up a decontainment chamber, they used a negative air scrubber both in the containment are and outside the containment area upstairs. After cleaning what items would be salvageable and removing all affected materials, they HEPA vacuumed the exposed wall and ceiling cavities before HEPA vacuuming the entire contained area. Using an EPA registered antimicrobial solution, they cleaned the exposed cavities. The surface was then sealed with an antimicrobial paint after they received a successful clearance result. The HVAC ducts, boots, and air registers were also cleaned, HEPA vacuumed, and had an antimicrobial solution applied to them. It was an unfortunate event for this family to experience such extensive mold growth but our team worked fast to restore their home and leave them with the confidence it was once again a healthy, comfortable environment.
Homeowners were concerned about white spots resembling mold in their crawl space. They contacted Olympic Restoration for a free estimate.
With the humidity levels high, visible mold was growing on the wooden beams and walls. We installed a SmartDrain with an airtight lid , an airtight floor drain and WaterWatch alarm system. Removing debris, we then sprayed the wood, including subfloor, beams and floor joists, with Mold-X2 Cleaner to remove mold and stains, then applied Mold-X2 Botanical to prevent future growth. Next we installed a CleanSpace drainage matting and CleanSpace liner to protect the home from the earth and water vapor.
A customer found Mold in Upstairs Game Room, located in the cabinet under a sink, and was informed it was caused by a leak and had contaminated the whole area. We were contacted to remove and dispose of all water and mold affected drywall, insulation, carpet, pad, tack stripe, and cabinets.
Our team was able to quickly come in and assist in solving the situation. A containment barrier was installed to quarantine the impacted area. We removed the cabinet, pulled back some carpet, and disposed of any exposed pieces that we were unable to salvage. Next, Negative Air Scrubbers were installed in the quarantine area, to help filter ambient mold particles from the air, and lower spore count. HEPA Vacuuming was also performed to further clean the area, and an Anti-Microbial Gel Paint was used on the remaining surface area to finish the process. After we were done, a Licensed Mold Inspector was called in to test the area again, and it was deemed successful and the remediation process was cleared.